Samsung SyncMaster 730MW 17" Flat Panel LCD Monitor "picture faint" Questions

...faint picture. Are bad capacitors to blame? In regards to the capacitors on the board...mine are somewhat raised and there is a white rubberry substance around them. The bad capacitors might be ...

...picture on screen appear/blank and it keeps on "tot-tot-tot" .... This sounds like either the capacitors are failing in the unit, or if you can hold a flashlight to see a very faint shadow ...

picture comes up crystal clear and then flicks off after about 1 - 2 seconds! I can hear sound but no image, if I look closely I think I can make out the menu screen. Is this an intermittent backlight

...920LM screen is brighter than the rest and seems to retain simultaneously the new and the previous picture for 2 to 3 seconds before it gradually fades out into the new picture. For example I am in ...

...faint picture, i can make can barely see the menu when i press the buttons. well take it back and get another one or get a reaprist guy to fix it.maybe ask someone from were you got it and tell them ...

...faint picture then it goes full white. You can not see menus or any picture once it goes white. I took the casing off and disconnected the ribbon cable from the main board to the LCD. I rubbed the ...

...faint waving motion in the picture, as if the screen was literally gel and began to wave, from top to bottom as it appeared. Best I can describe it ... any suggestions as to why? I only connected it ...

syncmaster 740n was working fine but has not gone black when i turned it on this morning and now i cant see anything, ive put it onto another computer but its still black and not showing anything ...

...faint picture that it is receiving from my laptop. After some research, I found that some others have had the same issue. I replaced the following capacitors on the inverter board (C112, C113, C316). ...

...faint of heart: I am an inexperienced and HORRIBLE solderer and know close to nothing about capacitors, resistors, etc. So, if I can do it you can too!!! hi, It may be the fault of your picture tube. ...