...you press the throtle it stalls Not sure if your model has two throttles or one. It should have a trigger and a thumb lever. Be sure the thumb lever is closed. if that is not the problem your mixer ...
...a spring around it. Turn it clockwise one full turn. Then, start the engine and slowly pull the trigger, if it still stalls try another 1/2 turn (clockwise) With trigger pulled all the way in
I have a Ryobi weed eater (the kind with the attachments) that stalls out when I pull the trigger. I can use it in low gear but it is much slower work. Carburetor needs adjus9 Look at this video...
IT STALLS WHEN PULL THE TRIGGER pluged high speed jet take bowl off jet carb spray gumout throught plastic tube in the bottom of carb jet may be in nut that holds the bowl on clean well and then put ...
Question about Ryobi Garden
My new Ryobi boggs down/ stalls as soon as I pull on the trigger. engine cuts out every time i pull the trigger. I sent this tool to a repair center who tell me i need a new carb. but Ryobi doesnt ...
... position the engine will not accelerate and stalls. It will restart - but stalls when the throttle trigger is pulled. I have cleaned the air filter, installed a new spark plug and a new fuel line ...
...get the engine started within 2 to 3 pulls, however, the engine will not idle - if I let go of the trigger, the engine stalls. Also, at full throttle, the engine does not seem to run at full speed. ...
stalls. even when warmed up it will stall despite playing with the gas trigger hi and low fuel adjustments need set and try cleaning the carb
Question about Garden
My leaf blower stalls when I pull the trigger from the start position. ...
Question about Garden
...32cc 4cycle blower: engine starts and runs with choke on 1 or 2 but immediately stalls when trigger is pulled or choke opened all the way to 3. My weed eater was doing same thing had to put ...
9 questions posted
Usually answered in minutes!
295 Questions
300 Questions
122 Questions
96 Questions
40 Questions