Ryobi Blower Vac 205mph Leaf Blower Or Vacuum Gas Powered Gasoline Zr08510 "gas fuel bulb" Questions

fuel lines, filter and bulb and still no gas into the chamber. I even cleaned the carburator. it now makes a whistling sound when I push the bulb Your fuel lines are the wrong way around, take a small

...gas. and i put in a new spark plug no difference The bulb pulls fuel from the carb into the bulb and back to the tank, if the bulb does not fill it is because there is a fuel blockage, either in the ...

...gas into the carb. Any ideas as to what my be the cause? I assume the new tank came with new fuel lines and filter in it. First be sure you have all the lines hooked up correctly. There should be a ...

...gas is getting into cylinder. I took the carb apart and might not have put it back together correctly. When I pump the bulb, nothing happens. When I loosen the two screws that hold the bulb to the ...

...bulb into the fuel tank, and the other goes from the back of the bulb into the carburetor. I believe that the line that goes into the fuel tank has disconnected from the back of the bulb. You will ...

...full of gas when it quits. I let some of the gas out of the fuel bulb and i starts up. Then the above routine repeats. Any ideas. check fuel lines and filter if they are good then may need a carb ...

...gas is moving when I pump it to start it. When I push on the bulb, it doesn't appear to pick up fuel. Is the primer bulb filling with fuel.? If not then you either have a hole in the primer bulb or a ...

...fuel is dumped directly in, it runs fine.Diaphram in carb does not appear to have a hole in it. has walbro wa219c carb. Should i replace carb and bulb? primer bulb on weedeater will not return to ...

...gas tank to make the fuel go up the fuel line?? how does the prime work? The primer bulb sucks fuel from the tank to the carb. When the carb has enough fuel the remainder is sent back to the tank. ...

fuel, bulb, lines, filter seem ok. bulb creates pressure in the fuel tank when priming but no fuel will enter the bulb. Hello Steve, Your problem sounds like an internal problem inside the carburetor.