HP LaserJet 4500 Printer "remove code 3" Questions

...code of 51.10 has been popping up all day for my p4014n printer. Help! Try this site: http://www.printertechs.com/tech/error-codes/error-codes-50-59.php " 51.X PRINTER ERROR A loss of beam-detect ...

...3.0 PAPER JAM [LOCATION] means A non-specific paper jam occurred. Soln 1. Remove jammed media from the specified location. 2. Verify the paper tray is fully closed. 3. Inspect and/or replace the feed ...

...code should help you. 66.00.15 EXTERNAL DEVICE FAILURE Description The stacker or stapler/stacker was removed and then replaced with the printer power was on. Action 1. Turn the printer power off. 2. ...

...code on a hp 4700 printer it states to remove the duplex devise from the printer. what is the duplex device and where is it located Duplex is here: But 59.30 error (Fuser motor startup error/Black or ...

...code 49.FF01 can't turn on or off A firmware error occurred ( This error is usually caused by a bad formatter board) SOLUTION 1. Press CANCEL JOB to clear the print job from the printer memory. 2. ...

...code only comes up when printing from InDesign.... any ideas? Same service error 49.4C02 when printing some PDF documents. Doucment prints ok when "Print as Image" is slected from the Advance button ...

code 13.01.00. It has had the feed rollers and sep pads replaced. When it runs it appears to catch on the separation pad itself since it shows a small buckle in the middle of the page that jammed. Any

code Resetting the Printer to Factory Default Settings Resetting the printer to factory default settings can be useful when you are troubleshooting with the printer. CAUTION Resetting factory defaults

...3 is installed). Remove any media and continue printing. 13.02.00 (HP 3500) 13.20.00 (HP 3700) Description A media delay jam has occurred in the registration area. Action Check for media stopped or ...

...code 10.00.00. i understand i can replace the whole black catridge and it will work, but i want to remove the the faulty chip from the black printer cartridge, how can i remove it? try cleaning the ...