...retractable electric cord won't retract. How can I fix it? The retraction mechanizm is likely jammed. Mostly likely the cord has jumped it's groove in the retraction wheel/hub. If you are good with ...
...after I pulled it out all the way it will only retract about 5 ft and stops/ spring in cordreel is sprung. cord is probably on last leg. Go to vac replacement parts online store and order a new
...there is a coiled spring inside that free wheels around a hub. pulling the cord too far out makes the spring slip on the free spinning hub. you may need to take apart the vac and rewind the
...cord was over extended and now will not retract It sounds like the rewinder spring either came off the retainer or broke. If it broke it must be replaced. If it just came off, it can be put back on ...
...stay pulled out. It just reels back in without pushing the button on top of the canister. what's going on with it? Replace the cord reel no need to replace the reel, the spring needs to be ...
the retractable cord will no longer retract into the vacuum. The vacuum is a month old. rewind spring broke return to where you bought it for replacment
Question about Vacuums
...It's very difficult to repair a cord wheel that's not working properly. There is a tightly wound spring that can cause harm if it comes uncoiled. It's best to try to find a replacement cord
spring, brakes and this stops it retracting. The fix is to replace the entire recoiler assembly. This is pretty simple job, if one can obtain the parts. However my professional advise is to take it to
Question about Hoover Vacuums
...Jeff The cord is stuck. More often than not the spring tensioner that wraps the cord up fails and wont allow it to retract or be drawn out. They are generally not made to be serviced but
Cord will not retract? This is caused by a broken retractor reel spring, you will need to replace the retractor.
27 questions posted
Usually answered in minutes!
65 Questions
50 Questions
44 Questions
48 Questions
34 Questions