HP PSC 2175 All-In-One InkJet Printer "scanner lamp moves making noise" Questions

...scanner lockdown mechanism. L1 is an indication that the lamp carriage is not leaving the home position. See if there is binding in the lamp, You can remove the glass WITH THE POWER REMOVED !!!! ...

scanner lamp. ? Power is turned on without unlocking the scanner. * Unlock the CR. ? The scanner carriage is interfering with any other part. * Remove the obstacle. * Replace the scanner carriage unit

...scanner lamp at the beginning point when you turn it on. When this sensor fail to function, the electric motor, which moves the scanner lamp will not recognize where to stop and it works without any ...

...scanner lamp. (2) if that don,t work then I suggest you take the scanner apart and clean the reference strip. this is a white bar on the scanner glass which tells the machine what the light level is. ...

scanner lamp and carriadge is moving when you run the copier up it mighht be saveable.. make sure the paper is new and dry as this can cause jams in hot section.. if you can see where the paper jam is

...scanner and see if the home position sensor, which would be a U shaped sensor has popped out. The clicking is from the scan head trying to find the home ( start) position sensor and not finding it. ...

...scanner lid sequence. Whatever you do, DON'T move it yourself if it doesn't come into the center automatically. Do wait until the ink tank holder stops! 4. Open the inner cover and remove the empty ...

...lamp ready state. Every 60 sec or so the scanner will move and reset. Some people do not like the noise is makes all the time. If you don't you can always change it back to the defaults. 2=0 and

...lamp back into starting position put glass back ( it uses the bottom of the plastic ( white part) as a reference or it will give you a code. 2- if it's getting stuck in the same spot take a look ...