Question about HP LaserJet Office Equipment & Supplies
...paper longer than 8 1/2 x 11 is loaded. Push the paper all the way forward in the tray and push the rear guide until it is snug with the tail end of the paper stack. Please check your settings in the ...
...paper specification which is longer than A4's 11 inches by the 2 inches you talk about. To release the paper extension, you hold and pull out the middle light blue tab (there are 3 Tabs) that is in ...
/2 inches from going all the way in. Is it possible you have the tray set for legal size paper. The design of this printer means that any paper size longer than letter results in the tray sticking out
Question about HP LaserJet Office Equipment & Supplies
...pages at the same tie and they do not remain perfectly stacked (so it thinks the paper is longer than it really is). Check to make sure your pick-up rollers and paper separator are in good
paper tray is full and it keeps doing this in the middle of longer print jobs. When i press "enter" it tries to continue printing, but does not print another page. Any clue what is wrong? This printer
Question about HP LaserJet Office Equipment & Supplies
...longer for the 2nd pass roller. if you have trouble with all paper sizes in tray 3 and have cleaned/replaced the feed and separation rollers you probably have a bad sensor or a bad clutch. paper ...
...Paper is loaded that is longer or shorter in the feed direction than the size configured for the tray. 1. Load the paper as instructed. 2. Press to print. 3. If the incorrect size was selected, press ...
Question about HP LaserJet Office Equipment & Supplies
...paper would feed into it, there'll be a cylindrical shapped roller with maybe a flat side on it. If its glazed and shiny, it needs to be replaced. You can kind of scuff it up with something like a ...
...paper tray sizes, localization language, or formatter number. Complete the following to perform a cold reset. A. Turn the printer off. B. Press and hold down the green GO button. C. Turn the printer ...
paper jam is no longer a problem. I have restarted the printer and my computer, but nothing seems to be resolving the problem. The toner was replaced a week ago and I do few print jobs, so I know that
435 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions