HP PSC 1350 All-In-One Thermal Printer "printing angled text" Questions

...text is not printing clear and sharp black, with some of the letters not printing at all. The majority of the text is very clear and sharp, but approx 10 letters are irregular in the print quality. ...

...angled on page It is worse on some pages but I have not discovered a pattern. The page emerges straight as far as I can tell; it is the print that is out of alignment. I have of course ensured that ...

When I print the text comes out tilted how do I allign them Have you adjusted the guides on the paper tray to ensure that paper is feeding in straight? The guides need to be set close to the paper ...

printing regular text documents, use the black print cartridge. Use a print cartridge protector to keep either print cartridge secure when it is not being used. Figure 5: Storing the print cartridge 1

Hi there, I have an Aculaser C1100. It works fine except that print is ever so slightly slanted, almost as if it is taking the paper through at a slight angle. Its only noticable with text near to the

printing the pages on an angle, the text starts out at the top of the page to the right and at the bottom of the page is more over to the left. its like looking at a doorframe that not straight if you

...printing printer prints text at an angle. This also happens mildly on photo copying. In this case what i would request u to do is....... Take out both the cartridges from the Printer......... Take 2 ...

the color images have vertical banding or streaking but the text appears fine. the occasional blace and white image doesn't seem to have this. what can we do to fix the problem? thanks! Good lunk ...

...text readable at times.It turned out that if I pushed in the knife slightly at top of the display, and angled the knife to push the display unit 'forwards' it would start to make contact, and become ...

...printing on an angle thus cutting off text on left side of page clean the rollers in back. The back door easily pops off. The manual says to gentle wipe the rollers with distilled water and a soft ...