Question about Sony UP Office Equipment & Supplies
...main logic bd, this is a common problem with the units and your logic bd needs to be replaced or fixed. If insturctions are needed on how to remove the logic bd please let me know i can pot something ...
Question about Canon Office Equipment & Supplies
Main unit status when the error occurred (0: Activating, 2: BD control 1, 3: BD control 2, 4: Changing the speed, 3: Operating steadily) 4th line: Polygon control status (0: Suspension, 1: FG rotation
Question about Zebra Office Equipment & Supplies
replace the main logic board assembly. Please contact me if you have any question or if a board is needed. I have them in stock right now and can offer to do it on exchange for you bad one. Please let
...bd interval error. there is a good chance that the when you open up the front door of the copier there is a fan assembly on the right side just above the main tray you slide out. that fan has a ...
...connection of connector CN18 on the main PCB and the continuity across the connector terminals. Remedy or replace if necessary. Replace the LSU. Replace the main PCB and check for correct
Question about Canon Office Equipment & Supplies
...Main cause The wiring is faulty (short circuit, open circuit). The BD PCB is faulty. The laser scanner unit is faulty. The DC controller PCB is faulty. Action 1. BD PCB Try replacing the BD PCB. Is ...
...main bd. what do you think? This sounds mostly to be the remote jack is broken or the pins on the jack need to be resoldered. If all you hear is just a beep when you send the print command, the print ...
...Replace the main PCB and check for correct operation. A little hint check the filter in the Bypass or MP tray its at the top and if it is filled with a lot of dust than the Laser is the most likely ...
the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error). Replace the laser unit. Replace the DC controller PCB. Check the wiring
Question about Sony UP Office Equipment & Supplies
...can not reset the counter The transfer belt always needs to be manually reset. *When this part is replaced, it is necessary to reset the "life" used stored in memory. To reset the fuser and
5 questions posted
Usually answered in minutes!
26 Questions
34 Questions
13 Questions
6 Questions
4 Questions