...timer knob you need to remove, look underneath the timer and you will find a black plastic pin depressed at the middle. pull it slowly for about 1/4 of an inch. then you can remove the knob in the ...
Question about Kenmore Washing Machines
...timer. Remove the screws securing the timer to the main panel with a nut driver and remove the timer. 6 Install the new timer into the panel and secure it with the screws, using a nut driver. Install ...
...remove timer knob on washer to replace. It unscrews or if it is a newer model, remove the console so you can tip it forward. You will see a (usually black or white) pin in the center of the timer, ...
...find any instructions for removing and replacing it. Remove top of washer then Remove timer knob then (2) screws behind knob, un- plug timer connector and replace of course always unplug machine ...
...remove timer knob push the timer in and turn it counter clockwise. this should unscrew it. if that does not work, check the back of the timer for a black plastic tab. pull it out to unlock the timer ...
Question about Maytag Washing Machines
...to attache the new one? THE TIMER KNOB CAP REMOVES AND THIRS A CLIP UNDER IT REMOVE CLIP KNOB WILL PULL OFF YOUR SEE A SCREW OR 2 REMOVE TIMER MAKE SURE THE WASHER IS UNPLUG FIRST REMOVE BACK ...
Question about General Electric Washing Machines
...timer shaft. Need to remove the on/off knob by removing the plastic "U" clip. Remove the cycle selctor knob and check that the steel spring clip on the selector is fully seated. Re-install the cycle ...
...timer or both? Thanks! Start a cycle and remove the knob. If it still stays in agitation mode and won't advance to the spin, then you have a bad timer, or no power to the timer motor(very unlikely). ...
...timer. How can I remove the knob? Hello, To remove the knob on this unit you need to push the knob in and on the back side of the timer in the center is a white plastic pin that you have to hold with ...
...timer knob on the front of the machine. some models you remove center cap on knob and pull pin out others you need to remove screws in console and lean in forward to acess rear of timer push knob in ...
654 questions posted
Usually answered in minutes!
249 Questions
101 Questions
108 Questions
50 Questions
52 Questions
