LG 65 Pint Dehumidifier Auto Shut-off External Drain - LD651EBL "bucket switch" Questions

...unhook wires to the bucket switch and hook or tape together,if dehumidifier runs then switch is bad. UNPLUG FROM OUTLET BEFORE DOING THIS. IF YOU DON'T UNDERSTAND ELECTRICITY GET QUALIFIED

that floater switch with the bucket out. you may need to press in the bucket switch so the machine thinks the bucket is in. then lift the floater and see if it stops running. if not, the switch is bad

...bucket removal safety switch on the left rear wall of the bucket holder. The bucket should not tilt down at the bottom when installed properly. Plug the cord back in and turn the unit ON. Set the ...

...bucket is empty. I can hold the switch manually but I still get the same result. When the bucket is removed and I don't hold the switch, I get a beep along with the light. With the switch ...

...bucket must trigger a safety switch, before the unit will turn ON. Remove the bucket and reinstall it, making sure that the top and bottom of the bucket insert squarely, so that it will trigger the ...

...bucket full" switch Unit will not run as the "bucket full" switch seems to not function so it thinks the bucket needs to be drained. Should I replace the switch or is it something else? Hi, ...

...bucket full switch to go off. Also check the float in the bucket for freedom of movement. you have to empty the bucket The float lever is at the top rear of the bucket. I had to wrap it (I used with ...

bucket removal safety switch (A trigger switch), it will cause the unit to think the bucket is full. After reinstalling the bucket, be sure that the bottom of the bucket is not tilted down in any way.

...bucket switch, to see if the switch is bad, remove the bucket and press in on the switch, if the compressor starts then the bucket is out of place if it does not start then the bucket switch needs ...

...bucket switch is not connecting. Remove the bucket, press the switch and try to run the unit. If it powers up and "works" then you need to make sure the bucket has a good connection with the switch. ...