Kenmore 50 Pint Dehumidifier Electronic Controls Energy Star 50501 "pump hose problems" Questions

...pump. There is a hose in the collection tray area that is connected at one end to the unit but not the other. After 1 hour of running, water was coming from that hose and not being pumped through the ...

pump (and a hose) to drain the condensate. The pump light started blinking about a week ago, turning cycling power worked for a while, until pumping stopped altogether. After investigating: -the hoses

...hose for clogs ive checked pump for proper operation. ive tried to block drip spouts going to bucket that just made water leak to floor. what else could it be? thank you. The clog is not in the hose. ...

...about the water that collects in the pan--- The hose system will bypass the pan and water will be pumped out automatically, check the pan once a week, ...

...hose should be no more than 5 feet long and MUST slope downward to drain properly. As, the drain relies entirely on gravity. There is no pump. Hope this helped you troubleshoot and solve the problem. ...

...from the sides. If you reconnect the drain hose, make sure that it lays flat from the dehumidifier and into the sump pump hole. I did that and it solved my problem of water leaking onto the

pump light is blinking ck your water pump and hoses , the light is telling you it has sensed a problem

...hose should be no longer than 5 feet and slope downward from the humidifier. It has no pump and relies entirely on gravity to drain the water. Hope this helped you to troubleshoot and solve the ...

...hose should not exceed 5 feet in length. There is no pump in that model dehumidifier. It relies totally on gravity to drain through the hose. If all of the above is as stated above, I suspect that ...

...pump Drain hose is obstructed or detached Clear out/readjust drain hose/tighten clamps Defective pressure switch Replace pressure switch Damaged or defective wiring Repair the wiring Defective ...