Canon Pixma iP6000D InkJet Photo Printer "photos lines running print" Questions

lines, if i print the same photo (10x15) with an A4 paper and not a 10x15 cm paper the photo is perfect. The White 'scratches-lines' is at the end if the photo and are about 1cm wide. Check your print

lines running through photos Go into the print preferences and make sure the paper type is set to the right setting.Glossy photo,satin etc.Then print a couple times on regular paper to get the excess ...

...lines on photos have been printing succesfully on canon photo paper and recently fine lines appearing. have cleaned print heads and deep clean what else can i do to resllove this? how many times have ...

...print head alignment. In this routine you get several lines printed off and you choose the number correspoinding to the set of lines that line up together the closest. Then, enter that ID number for ...

Lines across the tail end of small photos When printing 4 x 6, about 1" from the end of the photo, the printer makes a scratchy noise and I get lines across the entire widthof the photo. Sometimes the

...lines alternatively. (one line black, one line faded black...), sometimes involve blue too.. Anyone can help? Deep cleaning and cleaning First, are you running low on those ink colors? If not, ...

...print a photo there appear lines and the black in comes off when rubbed with my finger Did you run cartridge cleaning service from your computer after replacing the cartridges? If not, run cleaning ...

when printing with black only it fails to print approx every 3rd line. It leaves either a complete blank or half a line. I have run the cleaning processes many times and have installed a new cartridge

...lines across them? MG5220 trying to print from a usb on my laptop. All new ink cartridges. Try running one or two ink cartridge cleaning cycles to help clear the air out of the ink nozzles. New ...

...print with lines through them When I print a photo there are two tone horizontal lines that run through the picture. When I do a nozzle check, the 3eBK looks fine, but then all the rest of the colors ...