Canon PIXMA iP4000 InkJet Photo Printer "output tray sensor" Questions

...output tray is closed. open the paper output tray. printing will restart. the tray is open look for a small sensor on you right hand side. it tell the m/c if it is open or close. it migit be

...output tray is displayed but i cannot solve Cannon Pixma MP600 Printer shows paper jam in output tray. I felt i have removed all paper and even put the suction hose to it but to no avail When it says ...

...output tray is closed. Open the paper output tray. Printing will restart." And it doesn't work. Help!!! I'm grad school and NEED NEED NEED this printer to work! Apparently a solution has already been ...

...output tray pops open but something in front of it. i just moved what was in the way and then the error came up you might check that the sensor output is not broken. Also see if the sensor does not ...

...output tray is closed. Open the paper output tray. Printing will restart." Closing and opening the tray doesn't affect anything. If you can remove the tray - have a look at it and it should ...

...output tray or the door to the output tray is closed. This is the tray where the paper comes out after printing. Try closing and opening the tray. A sensor could be stuck. Here is the link to the ...

Output tray problem When I try to print, I get the error message that the paper output tray is closed even though it isn't. It will print anyway, but only if I continuously hold the tray down with my ...

...says "the printer output tray is closed, open it", but it is open, it is giving this error everytime I send the print job. you are having a tray sensor problem, call technical service

...output tray is closed, open the paper output tray and printing will continue The problem occurs when the paper tray is pushed down too far and 2 flimsy stop tangs on the backside of the tray hinge ...

...Output side of the printer. Look for a tiny bit of paper where one ought not to be. Tried the card stock idea, all I had was a stiffer paper than normal and it worked, turned out that a flower pedal ...