Canon PIXMA iP4000 InkJet Photo Printer "error five flashes" Questions

...five flashes pause then a further 5 flashes, It will not take paper from the bottom tray or top feed. This error mean "non installed or defective print head".First open cover and remove the ink ...

...ERROR SIGNAL, RAN OFF FIVE VERY VARIED COLOUR PRINTS, EXCELLENT RESULTS. TRIED AGAIN NEXT TIME SWITCHED ON, 5 FLASHES BACK AGAIN. CAN'T STOP FLASHES, PRINTER INOPERATIVE. HOW DO I CIRCUMVENT FLASH ...

...Error) What can I do? Refer to Canon documentation Five flashes: Print Head is not installed./ Print Head is defective please check correct placement with your cartridge, maybe it's not installed ...

...error, cancel printing and turn the printer off and then back on. When press Resume button, ip3000 not responed(not print) from iP3000 user manual: Five flashes: Print Head not installed / Print Head ...

...five short flashes in green).  The printing program states operator error. The printer will not print after the program error is stated. The program states to press the resume button or if this ...

...error If no paper is loaded in the auto sheet feeder, or if the paper is not loaded correctly, set the paper correctly and press the Resume button on the printer to continue printing. Three orange ...

...Five flashes: No Print Head installed, or Print Head failure Install a Print Head. When the error continues, contact a Canon service representative. Eight flashes: Waste ink absorber almost full Ink ...

...five times consecutively, that means there is a print head error. Reseat the print head, then reset the printer. To reseat the print head, make sure the printer is on. Open the paper output tray and ...

...Five flashes Print Head not installed/Print Head not installed correctly/Defective Print Head Install the Print Head. If the Print Head is already installed, remove the Print Head and check the ...

...error codes for that model. Something to try is to turn off the machine, unplug the power cord from the power supply for five minutes. Plug the cord back in and turn on the machine. Give that a try ...