Zanussi ZHQ575 Electric Double Oven "fix hole bottom" Questions

...has a broiler element. use some high heat two part epoxy let it set up just a little and then plug the hole. you can use titainum putty at a bering supply store but it's expensive but is a good

hole in the botton of the oven. The elements are hidden so don't know what caused it. We have had the stove for 4 or so year and never had a problem. Don't think it can be fixed or worth while???!! It

...fix, and if so, which part should I be looking for? Many thanks Dylan. I've just mended this myself and it took about 15 mins:-) It's more than likely the heating element, you can get one off the ...

fix it? i have been able to remove most of the plastic that is visible - - but what if some of the plastic oozed into the holes on either side of the bottom of the oven? could this cause an issue if I

hole. Hope this helped! Wow! Thank you for the spot on fix! Note: the whole unit doesn't have to be removed. Only the "keypad" needs to be removed (two screws). The offender is under the the pink wire

...fix the hinges on the bottom oven door as it doesnt shut properly at the top. Any ideas anyone? My neff oven came with my new house however the main door does not close properly.  The seal seems ...

...hole for screw THE HOLES MUST MATCH UPPER AND LOWER RECEPTOR OR THE SCREWS ON THE LOWER DOOR WILL SCRATCH THE UPPER DOOR .8 attach receptors to oven in new holes 9 slide oven back into cabinet and ...

fix it, the control panel has to be replaced. This is a very simple job and you will need just a 1/4â?² nut driver and a Phillips screwdriver. To get the right replacement part just click on

...pins have come away from the U shaped hinge bracket. The secret is to make sure that these are fixed firm back into the bracket. What I did was to nip the U hinge bracket in a vice, (or use ...

...bottom of the oven when the cooling fan (not the convection fan ) is running. If this fan doesnt run, it will trip that switch. Hope this helps! I also had this problem about 11 years ago. A repair ...