...weight of the clothes. For the machine to start the spin cycle to remove this water would place a heavy load on the motor, gearcase, pullys, belts, gears, ect. With the water drained, the load is ...
...http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0710496.pdf Water is 8.35 pounds per gallon. Plus the weight of your
...cannot. There is a pressure switch that measures the weight of the water before moving on to the next cycle. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE ...
washer weight about 150 to 200 pds.. if you clothes are coming out dry out of the final spin cycle theres nothing wrong...there is always a little water that stays in the washer maybe a gallon or so..
gallon+of+water+after+spin+is+done .. I had this issue and ended up following the advice of clipping off about 1/4" of the water sensor hose from the "control panel" (where the knobs are on the top of
...water level except nothing could be done, it was based on laundry load weight, too bad so sad. That was TOTALLY UNTRUE! I found out how to adjust it by another owner of the LG WM0642HW posting this ...
...gallon capacity shop vac, you may have to empty it 3 or 4 times before you get all the water out. If the pump is clogged, you can still drain directly from the tub. If you don't own either, I would ...
Question about Admiral Washing Machines
...made 1 cent on the penny found in the filter basket. You need a Torx screwdriver to access most of the panels. Reason for not spinning was the massive weight of wet towels and water sitting in
542 questions posted
Usually answered in minutes!
165 Questions
26 Questions
17 Questions