...thats was the problem its running without enough lubrication if a capacitor was not bad. set it again in normal position and try to turn the cooling fan with a screwdriver or pliers on the motor ...
Question about Dewalt Air Tools & Compressors
...prematurly turning on ? compressor gets up to pressure but after one or two nails it will turn on again sometimes it seems to cough a few times before it will finally shut off only to come on again ...
...before to reach 120 psi turn counterclockwise to stop the compressor at 120.then release some air again till it cuts in again and look at what pressure it will stop.keep going that way till you get ...
...to do in first place, if there is motion try direct move turn the same in the other direction and again and again forwart backward if you feel it s get a better movement then try again to start, it ...
Question about Ingersoll Air Tools & Compressors
...turns over again to start the process all over again. What's do you think the problem is? This is a new unit..... If it is a new unit, my guess is that it is still under warranty. If you go looking ...
Question about Air Tools & Compressors
again turns off has oil how long between starting and shutting off and restarting again they cycle to keep air pressure within predetermined limits stop when a pressure is reached and starts when that
turns over kindve sluggish and wont run. will even trip the breaker at the main if i dont turn switch off quickly. could it be the check valve or do i need to start looking elsewhere? i took the check
Question about Craftsman Air Tools & Compressors
...but not turning. I wait a while reset breaker, it runs for a little while then the breaker breaks again. two different problems here! first when it trips the breaker and you try to reset the
Question about Air Tools & Compressors
...you turn it on unles you press the reset button, so when it fills you have to do the same thing again. Thats with two compressors. regulater is bad.....thats the dial that shows pressure amount
E2 SHOWS ON THE DISPLAY PANEL EVERYTIME WE TURN ON OUR A/C AND IT SHUTS DOWN Turn if off and turn it buck on and reprogram it again. Albert Saavedra AC technician Fort Worth/Dallas TX 773-627-8766
55 questions posted
Usually answered in minutes!
3 Questions