Question about Dell Dimension Computers & Internet
power switch, power supply mother board, other? Yeah I have seen switches fail a few times, its rare though, trace the wire back to your motherboard and disconnect the lead, then short the pins. If it
Question about Dell Dimension Computers & Internet
...Power On switch, or the Power Supply.1) The Power On switch is located inside the plastic Power On button. It is an ATX power on switch. (The Power On switch is a Momentary Contact Switch )This is an ...
Question about Dell Dimension Computers & Internet
...Power On switch.IF, you bypass the Power On switch, and the Power Supply comes on, you have a bad $5 Power On switch.IF you bypass the Power On switch, and the Power Supply does NOT come on, you have ...
...power switch light blinked steadily. Reinstalled the old power supply, which had been working, but still no power up (the switch light blinks). I have triple-checked all connections and they seem OK. ...
Power On switch.IF the Power Supply does Not come on you have a bad Power Supply.You can still use the method to check the Power Supply too.Just because it's new doesn't mean it's any good
Question about Dell Dimension Computers & Internet
...power switch cable except the original power switch cable (and LED,etc) isn't the right connector type (16-pin) on my new motherboard (biostar pm4900-m4) and the cable is too short to reach the right ...
...Power On switch, or the Power Supply. The Power On switch is located inside the plastic Power On button. This is an example of a generic ATX Power On switch, http://www.directron.com/atxswitch.html ...
Question about Dell Dimension Computers & Internet
...Power On switch. (Behind the Power On button) B.Bad power supply C.Power supply cables have come loose inside the computer. 1.Power supply to motherboard. (20-pin connector on motherboard) This ...
Question about Dell Dimension Computers & Internet
...power switch, 2-wire reset switch, and a 2-wire speaker lead. The motherboard has a 9-pin front panel connector (J9G1) and a 9-pin control panel connector (J7J2). Separate question: what is a TAD ...
...power switch clicks ok. There is 5 volts on pin 9 of the big connector on the MB. On the 20 pin connector, short the green wire to any black wire with a paperclip. This will force the power supply to ...
256 questions posted
Usually answered in minutes!
2,074 Questions
1,169 Questions
1,075 Questions
718 Questions
514 Questions