Panasonic Lumix DMC-FZ30 Digital Camera "lcd cable" Questions

LCD will turn ON. Mine went black to, in the light of another lamp I noticed that the display worked but the backlight was bad. As some one else on this forum wrote it was the thin flat cable from the

...cable and the connector of lcd to board may be it has some condesation and re seating might help bcoz ur LCD is not damaged as u told me no impact not broken so it might be a faulty flex cable ...

...LCD flat ribbon cable broken My FZ-30 LCD back screen became dark. I dismantelled the cam and I saw that the flat ribbon cable that conects the lcd to the main board is broken. Electronics repairs is ...

www panasonic com help why is there no light in lcd monitor. The camera seems to be functioning otherwise. Check LCD flex cable.

...LCD? If so, it's possible that the backlight ribbon cable slipped out of the socket. To check open up the back of the case and carefully lift it up a bit just to see the ribbon cables. The narrow one ...

lcd screen for a new one. How to do this? You dont, let a professional do it old post, but perhaps the answer is usefull for other people. It's not that hard but you have to have some amount of skills

...cable that connects to the backlite screen not the actual LCD screen is broken where it was folded 90 degree and taped down. It must of got dry and just cracked right on the bend. So we need a new ...

LCD part for the TZ7 at yimaoshuma9898 It toke 1 week from ordering to delivery. It cost 60 $ but its much more cheaper than repairing at an official panasonic repair centre for about 200 $. Repairing

...on the backlight cable, it only need two to work. In order to avoid any finger print and dust fall on to the LCD, it would better wear a hat and plastic glove during this operation. thank u rate

how to replace lcd screen? where to buy? Hi, It's probably cheapest to buy a broken "donor" camera off ebay etc. LZ7 is a fairly popular camera and you're eventually bound to find one with e.g. broken