Intel Motherboard "red green yellow blue buttons" Questions

...green red and white wires. It has jumper type plugs on it that goes into the motherboard. I dont know how to place them on the motherboard so that it powers up. The cable is labled with diff led ...

...Red wires: +5 volts, orange wires: +3.3 volts, blue wire : -12 volts, violet wire: 5 volts always on. The gray wire is really important. It should go from 0 to +5 volts when you turn the PSU on with ...

...red, green~ps-on, violet~pg & grey~sb); -12v (blue); -5v(white); +3.3v(orange).. the 'oscillator and error amplifier ic', or pwm switching regulator circuit..look for defective ...

...red wire.Negative (Black) probe lead of multimeter to straightened out paperclip, in ANY socket hole with a Black wire.Reading should be VERY close to 5 Volts. (DC)Good?Go to ANY Yellow wire. ALL ...

red, green~ps-on, violet~pg& grey~sb); -12v (blue);-5v(white); +3.3v(orange).. check the battery n adapter [main power], in case of laptops.. replace with a standby n see.. 3) unplug mains supply.

...Green wire, RIGHT NEXT TO the wire. It has to slide down into the socket hole, right next to the existing wire, and touch the metal terminal at the end of the wire.The other 'leg' of the ...

...green dot in it. If not left-click on the empty small circle to the left of - Save File.Now go below in the small window, and left-click on OK.A small window will come up on the left.IN the top of ...

...red, green~ps-on, violet~pg & grey~sb); -12v (blue); -5v(white); +3.3v(orange).. the 'oscillator and error amplifier ic', or pwm switching regulator circuit..look for defective ...

...follows: hard drive LED pin 8-blue, red pin 9; button-black power pin6. white and yellow button pin 7 pin9 ready, green Pin8, not only takes away the reset button cable ready source of power and ...

...green, yellow, red, orange, blue) and another wire that is either black or white.  When this is the case, usually the colored wire is positive (signal) and the black or white wire is negative ...