uneven printing although the ink levels show lots of ink left when i print with black its very uneven, with lots missing, what can i do You need to clean the cartridges and the print head. Remove the ...
Question about Lexmark X Office Equipment & Supplies
...has fallen into the printer, or a piece of paper has been jammed in there. First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out. If ...
Question about Lexmark X Office Equipment & Supplies
...pages some lines are lighter than others with progression as pages go on I had bought a re-inked black cartridge from Staples; although my computer said that the cartridge was full, it
...ink cartridges and this does not help. It has been occuring off and on, now it does not print anything with out the verticle lines with out type in it. Uneven vertical lines can be adjusted by ...
Question about Lexmark X Office Equipment & Supplies
...ink cartridge. But when I print with the new color 17 cartridge, it comes out with uneven 'cross lines' of color, like sliced sideways. The printer seems fine and both ink cartridges are new. What ...
ink cartridge. --Another cause of uneven printing on a page could be that the ink cartridge is not properly installed. --Check your paper to make sure it is loaded properly and it is not wet, dirty or
...uneven spot, the ink supply is a little bit lacking, try to increase the ink density, ot there might be some dried inks in the nozzle of the ink distributor inside the drum unit, open the drum and ...
...the cartridge. If it contains alignment utility it should give you a better printout. Also check if you have enough ink on your cartridge. Uneven colour usually is due to lack of ink in the
Question about Epson Office Equipment & Supplies
my epson L300 printer shows it is time to reset the ink levels Lots of those messages are premature - keep using it till the color starts to disappear or show unevenness. Then replace or refill ...
...ink cartridge installed. Print became New black ink cartridge installed. Print became faint, uneven, and some lines are only partially printed. Return the cartridge to the supplier - it is
377 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions
