Question about Gigabyte Computers & Internet
...switch of your reset button. +SPEAK- speaker of your computer that is located on the front of your casing. it has a hole on it so that you just can insert a speaker with a rc jack aside from the rear ...
Switch up correctly. I have an MS-7142 VER:1 Can you help me? Hi carlmtclem, your not alone when it comes to hooking up the right led connector to the MSI MB. Firstly, you need to know what wire color
Question about MSI Computers & Internet
switch.F) There is NO pin 10.JFP2:4 pins across the Top row.3 pins across the Bottom row.The pins on the Top row are numbered EVEN.The pins on the Bottom row are numbered ODD.Starting on the LEFT side
3-4 Speaker (1+, 4-) 5-6 hard drive LED (5+, 6-) 7-8 reset switch (7-, 8+) 9-10-11 N/A (not used) 12-13-14 power LED (12+, 14-) ** only if power wire is 3 port connector ** 13-14 power LED (13+, 14-)
3-4 Speaker (1+, 4-) 5-6 hard drive LED (5+, 6-) 7-8 reset switch (7-, 8+) 9-10-11 N/A (not used) 12-13-14 power LED (12+, 14-) ** only if power wire is 3 port connector ** 13-14 power LED (13+, 14-)
...3 for the HarDDrive activity LED. Pins 5 and 7 for the Reset switch. Pin 9 is usually reserved for the factory, and is a 5 Volt test point. Pins 11, 13, 15, 17 for speaker; or not used. Same with pin ...
...switch.Looking at JFP2. (Junction Front Panel 2)Vertical with two columns of pins.3 on the Right side, 4 on the Left side.The Right side is numbered EVEN.The Left side is numbered ODD.Starting at the ...
Question about Computers & Internet
Wiring diagram to insert power sw, reset, hdd, speakers and power led wires 1) Restart switch works as power on... 2) Even after shutdown the fan of cpu,power supply and the box keeps working. I need ...
Question about Gigabyte Computers & Internet
...3, 5, 7, 9, 11, (NO pin 13), 15, 17, and 19.A) Pins 2 and 4 are for the Power On LED.IF, the LED is dim when the computer is on, switch the wires around.These pins are used for a Power On LED, that ...
...3-wire is a dual color LED) There are two rows of pins. Usually the Power On switch, Power On LED, and Speaker; are on the same row. HarDDrive activity LED, and Reset Switch are on the opposite row. ...
504 questions posted
Usually answered in minutes!
310 Questions
170 Questions
162 Questions
133 Questions
118 Questions