Canon SPEEDLITE 580EX TTL Flash "repair fire" Questions

...then it misfires, then maybe fire again.. I can repair it for you or try this first. Turn power on with no camera connection. Does it fire by itself? PC Sync on camera, does flash fires by

...have to wait 3-5 second ready to fire flash? You have a bad cpu chip in this flash . You need to send it ijn the the manufacture at NIkon . BERRIE SMITH CAMERA REPAIR 770-312-0719 / ...

...If you tried multiple batteries that you know are good and the flash will not fire while on the camera or via the test fire button, this unit will have to be returned to Nikon for service and

...fire again, and again, and again. I used the reset button, but to no avail it restarts and then keeps on firing????? THE CPU IN THE FLASH IS DEFECTIVE. SEND IT TO THE MANUFACTURE. BERRIE SMITH CAMERA ...

...the the flash won't fire even with new batteries. the display lights light, but no flash Send that back to Nikon for service. ...

...with full flash output I guess the sensor that detects the flash return has failed? Is this worth repairing any ideas on repairing it and what could cause this type of failure You might be looking ...

...fire a pre-flash and then a main flash. If it doesnt, the switch inside the shutter is broken and the shutter needs to be replaced. This is a pretty labour intensive repair and you may consider an ...

fire but only after you press the shutter 2 or three times. This is most often after the flash has just been fired but again I do wait 2 or three seconds and the light is on. Your strobe is faulty and

fire when shutter is pressed again I think the flash is not grounded to the hot shoe or Hot foot . Please note it needs to be cleaned and make good contact. If you want me to tkae crae of your problem

repair it (how can that be) I only want it repaired and am sure it is the bulb I don't want to buy a new one this could happen again at great cost to me. I have to say I am not very happy with Olympus