...PTP mode will allow you to copy RAW images. You have to check it. As for the RAW images, I suggest you download and install the Canon RAW codec from: ...
...mode to "PC Connection." BAD ADVICE! Setting it to PTP was all I needed to do. For Vista 64 bit OS: * set camera to PTP as referenced in other solutions *ALSO go into Control Panel>Hardware and ...
...do so. Its rather urgent. Thanks You need to change the camera's USB connection mode from "PC" to "Print/PTP" in camera setting menu. After that it should be recognized by Windows 7 without
...mode dial to (M)anual, press your camera's Menu button and tab over to the fifth tab (Setup Menu 2) and then down to the COMMUNICATION menu selection. Make sure that it is set to "PC Connection" and ...
ptp mode how to exit PTP mood Turn on camera, press home button. Click to Main Settings 1 and then use down arrows to go to Main Settings 2. Highlight USB MODE PTP, and use right arrow to change ...
...MODE PTP, and use right arrow to change setting to AUTO, and press Home button to exit. The procedure to transfer pictures to a computer running the Microsoft Windows XP operating system depends on ...
ptp mode samsung COMO hola como soluciono ptp mode en mi camara samsung wb200f gracias
...Storage is more common, and the problem could easily be that your camera is stuck in PTP mode. Can you go to Setup - Interface - USB mode and change it from PTP to Mass Storage and see if that
...PTP, Mass Storage, and Auto. The only mode that would work to bring up the Camera Wizard screen on an XP computer was PTP. Once I changed the setting from Auto to PTP, the camera was recognized and ...
...PTP, Mass Storage, and Auto. The only mode that would work to bring up the Camera Wizard screen on an XP computer was PTP. Once I changed the setting from Auto to PTP, the camera was recognized and ...
1,519 questions posted
Usually answered in minutes!
27 Questions