Question about Brother Sewing Machines
centered needle as a default. That is just how they were made. If she can reposition the needle to the center, then that is a pretty good option. Most older machines with the offset needles default do
Question about Sewing Machines
...needle so it is centered when it is set to center position. Now, it is in a right side position when set to center. Don't know the make/model machine. The following may be helpful: Sewing Machine ...
Question about Sewing Machines
Needle needs adjustment slightly to right, it is hitting left side of hole on baseplate. New needle, correctly set for straight stitch. It needs only a slight adjustment. I need a service manual, the ...
Question about New Home Sewing Machines
My New Home MX3123 sewing machine needle moves from center to right rather than left to center. How do I fix it? The instruction manual ...
timing is messed up, needle keeps breaking the needle and bobbin case doesnt line up right. Kim, there is nothing you can do yourself if the timing is out. But you can check it.- Remove the needle ...
Question about Bernina Sewing Machines
...needle be centered. To do any decorative or zig-zag stitching, the presser foot needs to have a wide space for the needle to swing back and forth. The zig-zag foot is marked with a zero. ...
Question about Baby Lock Sewing Machines
...needle centered. See page 49 of the manual for the pictures of the machine button and the stitches that allow for needle position changes. To avoid damage, you can't move the needle left or right for ...
Question about Euro-Pro Sewing Machines
Euro-Pro Shark Sewing machine needle off center, hits needle plate Up until yesterday, my machine was working fine. After attempting to sew with a denim needle, the machine came off center somehow, ...
...be adjusted so that the needle is perfectly centered. When it is off-center, you will get the problem you are experiencing with hitting one side of the zipper foot. May want to take it in for
needle position needle postion is off center(to the right)the feed dog can be seen on the right of the presser foot only and about 1/16" of it. In looking at the needle plate opening with the needle ...
54 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions