D-Link DP 300U (DP-300U) Print Server "default ip" Questions

...default IP address for configuration Hi As far as I can remember the default IP is 192.168.0 .10, subnet 255.255.255.0 If this isn't the correct IP address, you'll need to reset the d-link print ...

i reset the DP -301 u by reset button and i don't know the ip plz suggest how to configure it The default IP is 192.168.0.10 According to the manual, the default upon reset is 192.168.0.10.

what is the ip? what is the ip for the dp301u? default IP address of DP-301U is 192.168.0.10

...default IP address; look at the section on Networking Basics in the manual. All you need is a PC at same ip subset and use the browser to http://192.168.0.10 (the default). If not working, the ip may ...

IP address of your router in the address bar, which is 192.168.0.1 (Default router settings are written under the router) (unless you've configured otherwise, the default username is admin and the

Default IP is 192.168.0.10 There is no default password. BTW-did you try that yet? No password that is.... Jeff Yep. I have a DP-G321 server, and the thing that worked was uname: admin pword: (NOTHING

...IP address reset d-link dp-300u Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 ...

...Hi you can Verify IP address and port information on the print server by using either telnet or PSAdmin.however you can try using the the default IP address is 192.168.0.10. Let know if it

default ip address Dear May, You can download the softwares which can show you the exact ip of your device http://www.hide-windows.com/Download/ipscan.exe or you can download the PSADMIN software from

...default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is ...