2006 Opel Corsa Utility "indicator working hazard switch" Questions

...fuse first. But if the front and back on one side works and the other side doesn't, Replace the turn signal switch. Indicates working fine on outside no left side on dashboard same thing with ...

...there is power and earth to switch then replace ur hazard switch its faulty but if there is no power and earth to switch then it has whirring problem hazard lights stop working on pajero indicators ...

...suffer indicator problems when the hazard switch is rarely used. Often a few minutes vigorously operating the hazard switch restores operation but if the switch is broken it must first be

...working.......any ideas, thanks for helping ... is a new hazard switch you replaced it with and check to make sure the hazard swith is coming all the way out if it hangs just a little bit it will be ...

...switch hazard lamp switch On then fuse is blowing. When I put bulb in fuse's circuit then after switch hazard lamp On flasher unit is jingling, indicators still doesn't work and there is short still. ...

...indicator switch. The unit should have an ignition supply to it as well as a perm ant supply when the hazard switch is pushed down. Sometimes these switches get sticky contacts so if you bang the ...

...check for a feed first to teh indicators and the hazard switch if you have a feed then renew the hazard light switch first as this switch if defective will stop all the indicator lights from ...

...indicator lights working but not hazard lights. I have checked the hazard switch and all the fuses but can not locate the relay which I believe is a separate relay to the indicators. I have checked ...

...indicator problem my indicators work but my hazards don't.when i press hazard button indicators don't work Call the aprt store and ask them if there is a seperate flasher for the hazard, if there is ...

...indicator relay on 03 clio indicators stop working while driving if car stopped they work again.i pressed hazard switch they did not work then they started again cant find relay it sounds like it is ...