2005 Nissan Almera Tino "timing marks" Questions

What are the timing chain marks for nissan almera to set your timing

My fuel guage is giving a flactuating reading.Half the time it won't come down past the halfway mark only when the car is in motion. it never gives a correct reading. How do i fix this? Fix the loose ...

timing marks on hyundai elantra 2009 4 cyl. valve timing, crank pulley T D C mark to mark on timing cover. Cam gear mark to mark on head or block . Ignition timing T D C mark on crank pulley to timing

...timing marks line up. There are three timing chains on these engines. On my Sorento even after the timing marks have been set and the engine is rotated by hand, after numerous revolutions the timing ...

...timing marks. Install right and left timing chain guides. Tighten bolts to 89 in-lbs (10 Nm). Rotate the left camshaft until the timing mark is at the 12 o'clock position. Rotate the right camshaft ...

...timing marks on the camshaft timing gears are in general alignment with the timing marks of the camshaft bearing cap: TIMING MARK IDENTIFICATION CYLINDER BANK INTAKE GEAR MARK EXHAUST GEAR MARK RH ...

...timing marks - crankshaft should be on the 0 mark. Camshaft timing marks--intake camshaft mark set at 3 o'clock and exhaust camshaft mark set a 9 o'clock. These timing marks are critical for motor to ...

Timing marks setting Hyundai Lantra can anyone tell me how to set the timing marks for a 1996 Hyundai LANTRA (not elantra) 1.8L.. Specifically the cam timing marks where do they set at? Or post a link

...timing marks, 1997 ford escort where are they? Ford Escort/Tracer 1991-1999 Repair Guide REMOVAL & INSTALLATION 1.8L Engine (see Figures 1, 2, 3 and 4) Disconnect the negative battery cable. ...

...timing marks are just above the cams at the "twelve o'clock position" If necessary, align the timing marks. NOTE When aligning the cam pulleys with the seal plate marks, align the left cam pulley ?I? ...