Question about Mercedes-Benz C230
...Turn key to on position just before you turn on the ignition, turn off all electronics push gas pedal till you feel a click then hold down for 15 secs. Release gas pedal turn off key and wait for 3 ...
Question about Mercedes-Benz C230
...turn the key in the ignition and try to start the car, it sounds like my speakers are blowing and their isn't even a clicking noise from the starter (the dash gauges al Car won't start. ...
Question about Mercedes-Benz C230
...key in ignition. Why? Recently replace thermostat and battery. Clicking continues after car started and warmed up If your 2007 Chevy Impala is making a clicking noise before the key is even inserted ...
Question about Mercedes-Benz C230
...ignition key is turned a clicking noise is heard. Apparently, a clicking noise is heard when the ignition key is turned to start the vehicle. The battery posts and cables are clean and tight. The ...
...ignition switch... But! If you are turning the key and you are not getting anything from the starter, then replace the starter. Another words, if you are turning the key and there is NO noise at all ...
turn the key. All I can hear is some clicking coming from the carbarator & a humming noise under my truck from the carbarator to the gas tank. I changed the fuel filter & it worked for most of
...turn over won't make any noise when turning key First check the starter relay, see if it is getting voltage when the key is turned - if Yes and it is not clicking then the relay is bad, not very ...
...Key will turn in ignition but doesnt start the engine. I cannot remove the key, nor turn the stearing wheel or change gears from park to nuetral. The lights on my car were all on, my battery was NOT ...
turn over and still getting a clicking noise from fuse box. The clicking noise continued even when the key was not in ignition only stopped when removed the old battery. Now that the new battery is in
Question about Mercedes-Benz C230
...Turn ignition key, has battery power, no noise at all from the engine. Belt is fine, alternator is fine. When key is turned to on position, no noise, no clicking or anything. Lights all work, guages ...
115 questions posted
Usually answered in minutes!
630 Questions
563 Questions
615 Questions
474 Questions
420 Questions