2007 Dodge Nitro SLT "engine valves" Questions

Ad

...NITRO 4 LITRE EGR LOCATION 2007 LOOKING FOR EGR VALVE LOCATION ON MY DODGE NITRO 2007 4.0 LITRE ENGINE. PICTURE OR VIDEO OR DIAGRAM PLEASE The metal tube from the intake going behind the engine

Ad

...mean its not burning it,check the pcv valve to make sure its working good, this came make the engine use engine oil if its plugged or not connected good, start there and maybe even replace the ...

Ad

2007 dodge nitro AC will only work after engine heats up the AC will not start unless the engine is warm. The AC compressor will come on for a second then shut off about 3-4 times then nothing until ...

...thermostat have been replaced. blend air door is functioning properly, no sign of leaks. checked engine oil for contamination and pulled spark plugs and checked for possible burning of coolent. I ...

Question about Dodge Nitro

1 Answer

Nitro. Why doesn't it upshift? Code 0750 If your vehicle with a Nitro engine is not upshifting and you're getting a P0750 code, it indicates that there is a problem with the shift solenoid "A". This ...

Question about Mitsubishi Cars & Trucks

2 Answers

engine runs for about 30minutes before adjusting the valves,valve clearances:intake valve    = 0.20mm(0.008 in)exhaust valve = 0.25mm(0.010 in)for reference only when the engine is cold

...valves, turn engine till #5 valves rock, set # 2 valves, turn engine till #1 valves rock, set # 4 valves. Once you have located #1 TDC (the second mark in the pulley should be lined up with the cover ...

Question about Mazda Cars & Trucks

1 Answer

...brawny The valve tappet clearance for the Mazda Bongo Brawny can vary depending on the specific engine model and year. Here are some general specifications for the different engine types: 2.0L FE ...

Question about Nissan Cars & Trucks

2 Answers

to the gap between the top of the valve stem and the cam that operates it. The inlet valves in the engine open to allow air and fuel into the cylinder, while the exhaust valves let the burnt gases out

...3.0 v6 Disconnect the negative battery cable. Remove the upper intake manifold. On the 3.0L DOHC engine, remove the ignition wire cover. Remove the ignition wires and spark plugs. Remove the ...

Not finding what you are looking for?
2007 Dodge Nitro SLT Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...