2007 Dodge Nitro SLT "engine valve replacement" Questions

...engine heats up and then nit will run great. The system has been evacuated , Evap and expansion valve replace and recharged after 3 45 minute vacuum cycles clutch problem in the ac compressor pulley ...

EGR valve how to replace how do i remove and replace Different on each engine. Buy shop manual for details and torque values.

...valve will keep the engine at that temperature. The things that can interfere are the heater hoses, or by-pass hoses., which route the the coolant other places. From your description, it sounds like ...

...engine i thought maybe it needed gas line antifreeze or injector cleaner so i applied it to the tank and the lines off the pcv valve and let it run .it still hasn't changed .i'm thinking about ...

...valve cover off engine. Clean surface - Clean the surface where the valve cover sits. Replace gasket - Replace the old gasket with a new one. Put back valve cover - Place valve cover back on engine, ...

valve from the engine and listen to it as you shake it. A working valve usually has a Rattle sound. No rattle suggests a stuck valve. Some valves can be cleaned but this is usually a short term fix or

...valve, change engine oil and filter and reset engine code. When is the code detected? When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ...

...valve on this engine? Steps? I just bought a new one and I need to get it replaced. FORD 1994 Taurus SHO 3.2 liter engine YAMAHA may just need cleaning with carb cleaner. here is 1996, oldest I have: ...

valve improves engine performance at low and high engine speeds depending on the engine load. The IMT valve assembly consists of the following: • A tuning valve • A microprocessor • An electric motor

engine off. Remove PCV valve. Shake valve and listen for rattle of check valve inside. If a clear rattle is not heard, replace PCV valve. Visually inspect valve for varnish or deposits whic h may make