1977 Chevrolet Corvette "power jam instructions" Questions

by step,,because if u are not replacing the regulator,,just the motor,,u have to take it apart,,have u test for power??could be switch,,relay,,broken wire between door & door jam,,hoped it helped,

...up and seat won't move. look under the seat and first see if something is jammed under it.... and that the wire that moves with the lever is intact. different instructions if that is a power

...jam, there are a few possible causes for the issue: Low battery power: Ensure that the battery is fully charged. A low battery can result in inconsistent firing. If the battery is older or has been ...

...power lock kit, they come with all the wiring needed and most of the time plug in under the dash and go thru rubber plugs in the door jam with very little wire splicing. Just follow the instructions ...

...POWER LOCK (RELEASE BUTTON). CHECKED FUSE AND ITS OK. You may want to just remove fuze #28 under the hood...for about 30 seconds...reboots the bcm and it corrected my Aztek's ills. many thanks to ...

...instructions in my Haynes manual to change my timing belt. The car is a 1989 Toyota Corolla (4aFC). My problem is that the manual says to jam a screwdriver or lever in the ring gear to stop the crank ...

...power to bring the window up, driver side window is the first one to go out because it gets more use of than all the other windows. the ony better way to find out is to remove the door panel an make ...

...power , 12vdc to motor 2: motor bad. (got 12vdc there active) 3: or its jammed. to tell if its jammed is easy , disconnect the motor drive then turn the drive end by hand , cant move it? that means ...

...instructions, holding switch with window in fully down and up positions and have heard click after 2secs. Have held for varying lengths of time after click and in all variations, door open/closed, ...

...power to the light motor . The little bushes on the arms wear out and the arms can lock or fall off and jam the motor crank. I suggest ...