2002 Chevrolet Cavalier "replace front drive shafts" Questions

...front and turned the wheel by hand but cant isolate the noise to either the cv shaft or the wheel bearing. it is a constant sound so i am guessing wheel hub/bearing but woyld appreciate any other ...

...front drive axle chevrolet cavalier 2004 Do yourself a favor and replace the whole cv shaft. Quicker, eaiser and not much money. First get the car in the air and remove the wheel. Then pop the lower ...

...front of the car. Is it the cv joints or the wheel bearings? If it is wheel bearings the noise would be there all the time with a growing whine as you accelerate, to me I would say the drive shafts ...

...replace procedure You don't need the special tools that they use in this procedure, you can use a hammer and a block of wood to get the axle out of the hub and you can use a pry bar to get the axle ...

97 astro van awd there is a clicking in the front end only when driving straight, have replaced half shaft, wheel bearings, brakes, rotors, and calipers, and the noise is still there any ideas Have it

...front pump seal which would have fluid leaking between the engine and transmission, or a torque converter seal the leak would be the same place. Or the pan gasket or the drive output shaft seals and ...

...Front Seal is leaking. Question: Does the engine need to be pulled to replace the seal? No. The crankshaft pully can be removed through the right wheel well area. (This is the hard part) Once the ...

...drive vehicle to ensure proper operation. NOTE: The principal parts of the clutch system are the driving members, the driven member, and the hydraulic system. The clutch housing is part of the manual ...

...replace front drive shaft ? I need to replace the front drive shaft and am not sure how to do so? Mark the drive shaft postion to the transfer case and front axle. Remove the bolts/straps from the ...

...replace front gearbox output oil seals and front wheel bearing-drive shaft dust seals. These are fairly inexpensive and may prolong the life of components as well as reduce the need ...