Behringer FBQ1502 Ultragraph Pro Dual 15Band EQ "hook powered speakers mixer" Questions

2 Mackie 350 V powered speakers Can I hook them up? How do I? Thought I answered this. Using balanced TRS cables, connect the powered speakers to the Main L and R 1/4 inch jacks on the top of the unit

...hook up my JBL powered speakers. Yes... to get best noise performance use balanced TRS or XLR. ALSO power the speakers and this mixer from the SAME receptacle to avoid ground bounce and possible ...

...powered mixer with a power amp, and sent me a non-powered monitor. That doesn't work either. What do I have to do to get my monitor to work with this system? You haven't mentioned what model and ...

...hook up my amp to my gemini 3610dj station no sound coming from speakers but i can hear it n my head phones typically (unless your useing other gear besides mixer and amp) you'd come out of the ...

powered mixers, hook up two matched speakers/loads to each chanel of the output. Your best bet is to shed those monster cabs, there really is no need for them especially with this sized powered mixer,

...hook up a seperate power amp . to the pmp 6000 powerd mixer . for more over all power. You can add extra amps driving ADDITIONAL speakers... you CANNOT parallel amps driving the same speakers. Drive ...

powered speakers using either XLR or TRS connectors on the ends. Please tell us what powered mixer you have so we can give you better answer regarding which connections to use. IF for some reason your

hook up two powered 15's and two passive 15's to this mixer(1202-VLZ3)? You connect the powered 15's using balanced cables. The passive speakers you will have to get an amplifier for as the mixer does

...hook up speakers? Sound sounds muffled You DON'T connect speakers to this... this is NOT a powered mixer... you MUST use external amplifier !!!! You use bvalanced (TRS) cables to a suitable power ...

...R" out and the other to "main 1 L" out. if you have additional main speakers, hook them up the the "main 2" outputs. look for the "bridge amp mode" switch and move it to the "main L- main R"