Question about Yamaha Fuego 50 2T Motorcycles
...stator socket - the resistance (with ohmmeter still set on the RX1 scale) should be 0.1-0.2 ohms - if the resistance is lower a stator short is indicated. Which means that the stator is damaged and ...
Resistance across the stator sockets should be 0.1- 0.2 ohms. b. If the resistance is lower, a short is indicated. The stator is damaged and must be replaced. c. If resistance is higher (OL on meter),
...stator socket - the resistance (with ohmmeter still set on the RX1 scale)should be 0.1-0.2 ohms - if the resistance is lower a stator short is indicated. Which means that the stator is damaged and ...
...stator socket - the resistance (with ohmmeter still set on the RX1 scale) should be 0.1-0.2 ohms - if the resistance is lower a stator short is indicated. Which means that the stator is damaged and ...
Question about Yamaha Fuego 50 2T Motorcycles
...stator socket - the resistance (with ohmmeter still set on the RX1 scale)should be 0.1-0.2 ohms - if the resistance is lower a stator short is indicated. Which means that the stator is damaged and ...
Question about Yamaha Fuego 50 2T Motorcycles
damaged. If lamp lights dimly or not at all and stator resistance is o/k (very low ohms between the stator wires), then magnets on rotor may have detached and broken up or rotor is loose on crankshaft
Question about Yamaha Fuego 50 2T Motorcycles
...resistance on the Stator, 2001 KLX 300. Which wires get tested and in which order? Not familiar with this exact model but I have tested other stators. There should be 3 wires of the same color at the ...
...stator socket - the resistance (with ohmmeter still set on the RX1 scale)should be 0.1-0.2 ohms - if the resistance is lower a stator short is indicated. Which means that the stator is damaged and ...
stator connector on the rectifier, it should be some resistance between 3 wires, and no resistance from wires to ground, or start the bike and measure the voltage between 3 wires, it should be ca 80 V
resistance issue will be very easy to spot as when you test you will get usually zero as the reading if faulty roughly speaking you would expect 240 - 380 and 720 - 1000 and 40 - 66 on the three pairs
6 questions posted
Usually answered in minutes!
652 Questions
453 Questions
469 Questions
316 Questions
292 Questions