NetGear WGR614 Wireless Router "tab 2 10 firmware" Questions

...2. It will prompt your for username and password. Type admin on both. 3. When you get to the router's Setup Page, go to Administration, then click the sub-tab Firmware Upgrade. 4. Browse for the ...

...2. type in the address bar. http://routerlogin.com 3. Enter username as admin and password is password. 4. Once you log on., it will automatically search for available latest firmware. If the ...

...2.437GHz (if this was already selected you can change it to either 1,9,11) Wireless SSID-Enabled and click Save Settings 9.Click Wireless Security and fill the sections as mentoned Security Mode-WEP ...

...tab CLONE. After that click Save Settings. 8.Now click Wireless(to configure wireless) and fill the sections as mentioned Wireless Network Mode:Mixed Wireless Network Name:As per your choice Wireless ...

...2.Enter the Model Number of the router and hit enter 3.Click the Download Tab 4.Select the hardware version of the router(Turn the router upside down and below the linksys logo you will see the model ...

...2.437GHz (if this was already selected you can change it to either 1,9,11) Wireless SSID-Enabled and click Save Settings 9.Click Wireless Security and fill the sections as mentoned Security Mode-WEP ...

...tab CLONE. After that click Save Settings. 8.Now click Wireless(to configure wireless) and fill the sections as mentioned Wireless Network Mode:Mixed Wireless Network Name:As per your choice Wireless ...

...2) Launch a browser and type in 192.168.1.1, leave the username blank and the password is admin or the password you have set when you first configured the router. 3) Click on the Advanced tab then ...

...2.Type 192.168.1.1 in the address bar of the router and hit enter. 3.Leave the username blank and type admin in passowrd. 4.Click Wireless Tab and fill the sections as mentioned: Configuration ...