Western Digital WD Caviar Blue WD3200AAJS - hard drive - 320 GB - SATA-300 SATA "diagram sata drive" Questions

drive gets it's own connection to the motherboard. Check you motherboard diagram, and make sure the 320GB drive is plugged into the 1st sata controler, and that the 500GB drive is connected to the 2nd

...diagram showing how to splice a WD3200AAJS into a usb cord You can't spice a sata cable into a usb cable. You buy an external enclosure like this ...

...diagram showing how to splice a WD3200AAJS into a usb cord You can't spice a sata cable into a usb cable. You buy an external enclosure like this ...

...SATA and has no diagram on the hard drive it's self no jumper at all on sata device You don't need it. On SATA hard drives, jumper settings enable or disable enterprise-level features. SATA hard ...

...Sata drive that have to be set. The good part is that there is a diagram on the device that will tell you which settings are for Master/Primary and Slave. You want to set it up as a Slave. Sometime ...

diagram. Connect the hard drive to the power and IDE/SATA cable. Ensure the other ends are connected to the motherboard. Use the screws to mount the drive. Replace the desktop chassis. Turn on the PC.

diagram and set the pin cap in its slave position on the hard drive--for example, some drives may require the cap to be placed on the last two pins to set the drive as a slave. During the boot process

connect the new hdd to the 2nd sata port. Every hard drive I've ever seen had a pinout diagram on it. This pinout diagram is small, and you might have to use a magnifier, but it's always near the pins

...diagram need to put it as a slave There are normally no jumper settings on a SATA HDD as you can only connect one drive per SATA port, hence every drive is a Master on its own port.You can set Boot ...

diagram sata drives will automatically designate master slave  single or master :::::master with slave ::|::slave :::|:note the plastic jumper is | located at the rear of the hard drive next