...projector does not receive the Y-Pb/Cb-Pr/Cr signal! This is a new problem, since I use to switch from the S-Video input (to wacht TV) to this input (to wacht DVDs) The S-Video signal continues ...
Question about Sony Office Equipment & Supplies
TV seems to have trouble turning off and turning on. Any suggestion? make sure that the power supply is on the right voltage. Are you sure there is really a problem? Remember these sets have globes in
now will not turn on. Red light flashing on front switch panel. If the red light flashing 3 times the pause and again flashing 3 times, check and make sure lamp cover is installed correctly back on tv
...tv hasnt worked properly for the last few weeks, i switch it on the standby light is green blue screen comes on then the screen goes off and standby light goes red, whats wrong with my tv? sorry but ...
XL-2100U lamp cycles on and off I bought a new replacement lamp (XL-2100U) and changed out the old bulb. Now when I turn on the TV the picture comes on and stays on for a few minutes and the bulb goes
...tv but the light is flashing indicating that the "cover" is not secure, how do I "secure" it? just secure the screws and be certain that the tab on the door actually touches ...
Question about Sony Office Equipment & Supplies
...TV's may exhibit warping to the lamp access door. In rare cases, some additional components may also become damaged as a result. and so on........ You probably have some components melted on the ...
Question about Hitachi Office Equipment & Supplies
...tv turns itself off whenever it wants and leaves no standby colour light, set has to turned off via power switch on the side only after sitting for a while ex; 30 mins plus How old is the unit? Did ...
Question about DSMiller Inc Office Equipment & Supplies
gos off, Lights flashing on the front. check the door switch for the bulb, if it is not contacting with the switch the tv will turn off. it somtimes dont catch the switch when you put the door back on
Question about Hitachi Office Equipment & Supplies
...TV, pull the lamp and try to reseat it. Sometimes the contacts are not perfect. Make sure that all panels and doors are closed as many units have a switch that must be activated with a pin on the ...
7 questions posted
Usually answered in minutes!
94 Questions
59 Questions
55 Questions
35 Questions
28 Questions