Sony SLV-D350P DVD Player/VCR "blu ray goes static" Questions

...goes straight to the gray static. Help? Mechanical fault. Contact any service technician. The disc loading mechanism should be taken out from the TV for repair. If you wish to get some details; check ...

...goes from light to dark and gets all kinds of static lines thru it I work for Coby technical support. Our customer service phone number is 1-800-727-3592. If you bought both copies of the dvd in ...

...goes!!!!!! Toshoba guessed that there is a static charge in the remote that is discharged using this method. I know.....IT WORKED for me. thats stupid. i took mine apart... the motor that turns your ...

static marks. The same tapes play fine on another VCR. The picture looks fine if the VCR is paused or fast forwarded. I have no problems with EP tapes. there are guide posts that the tape goes around,

...goes faulty, quite often, and needs to be replaced...It really isn't a DIY task.The very best thing to do is contact a local or head office from Magnavox (RCA), and ask them for a referral to ...

...blu-raywith built in HDD and HD tuner (model number: HR825T). I also only have an indoor antennna that i hook in. Problem: i have never been able to tune in tv on its own. the auto tuning brings up ...

...goes off...for a while and see if it turns off again...and see what happens. not sure if this is the same problem but mine would work fine for about 5 minutes then go completely dead, only switching ...

...goes back to hello ive unplugged overnite and left on but nothing help some one and no there seems to be no reset hole next to tray.....bob BTW - I did open the unit up, and my hunch is that it is a ...

...goes and is replaced by a static noise although the picture remains. The recorder is hooked up to the satellite receiver for receiving satellite channels and aerial channels (the problem occurs on ...

...goes back in both manually and by remote, however that is all it does....wont load or play...dont know what to do?? A menu does not come up and the instructions are not clear...Please help, I cant ...