Sony KV-XJ29M50 29" TV "red cable speaker" Questions

...red power light blinks,no power,or sound tart checking the cable connection to receiver, try moving or replacing cables. If you have a surround with external speakers check surround connection cable ...

...cable to an RCA input labeled Audio - L (left, usually in white color). Your speaker should be connected to your amplifier labeled output or audio out. The connection type depends on the make and ...

...red cable isn't plugged in at all. Yes, TVs like this sometimes only feature "mono" sound rather than "stereo." It has only one speaker inside, whereas bigger TVs have two, but it still sounds okay. ...

...audio amplifier, by connecting Av cable in between devices, and can listen audio from external speakers.  Picture of AV cable is shown.  Keep free its yellow pins.  Use red and

...coming out of left speaker if using av inputs make sure to have the red and white cables pluged in.NOTE some tv's only have yellow and white av plug ins if your tv does only one speaker will play ...

...Otherwise, just use the white (left) cable to feed the mono input (white) and of course the yellow to yellow for video. Just ignore the red wire or lightly tape over it to avoid any short. Best, ...

...cable. if you dont have this connection. look for a red and white connection on both devices this is just a simple audio lead . To recieve the sound through the speakers after you have installed the ...

...the cable box Did you check speaker on / off selection in audio menu?Did you try A / V input = yellow,red and white from cable box?That hook-up is different than RF coaxial cable input to

...red and wht audio output to the input on the stereo.You could also use computer speakers just make sure you get a minijack to rca cable like the ones used for hooking up ipods to stereos.Computer ...

...can use the Xbox360 that is plugged into Comp-2 in the back of the TV YOU HAVE TO PLUG AUDIO CABLES(RED ANDWHITE) AS WELLA SCOMPONENT VIDEO. COMP VIDEO IS ONLY ...