Sony FD Trinitron WEGA KV-27FS120 27" TV "turn signal keeps blinking turning" Questions

...turn off and blink 4 time a red led make a pause and keep blinking 4 times, what that could be? Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video ...

...turn off and blink 4 times the red led, what that means? Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check IC1509, Q1505. ...

turn on. It is receiving power and the tv tries to click on; but the screen doesn't get that static-y sound. Then, five red blinks (4 blinks and a very short 5th blink, actually), and ... nothing. The

...signal back to the IC that monitors it. Theres only one fix (besides replacing the tube) for your set and that is to turn up the screen control. You have to remove the back from the set and on the ...

...turn on HI, Unit is dead, No blinks - Problem in the standby power section. Might check fuse, R607, Q601, IC601, R612 and VDR601 (should show open). Continuous blink once a second, no pausing - No ...

...blinking codes. About the five blink code it has this to say: "Blanking - Standby light blinks five timesCircuit - The Ik signals are measured by Y/C, CRT Drive IC201 and areu sed to adjust the RGB ...

...turn on. The timer light keeps blinking. Unplugged it overnight but it still happens. Is this worth saving? Is there a reset button somewhere for the timer? The TV is on protect mode. Try first ...

...turn on. There is a red blinking light that indicated stand by, and will blnk for 6 or 7 times. Do you have any ideas on this problem? Thanks Many of the later model Sony TV?s have a built in ...

turn on. The TV is on protect mode. Try first leaving the TV power cord unplugged for at least a couple of hours. Also ensure that the fault is not coming from a faulty receiver box sending bad signal

...turn on. The red indicator light keeps flashing. I have unplugged it for a long period of time and tried to see if that would reset what ever was wrong but no luck. any suggetstions? the red light ...