Uniden BC244CLT Base Scanner "reset button" Questions

RESET button then release TUNE button. Try the scanner. If buttons don't work, you may need to verify that KEYLOCK is off. A more comprehensive instruction is detailed at http://support.radioshack.com

...reset button inside scanner can someone help my scanner is locked and cant unlock it i press reset button on side but cant see reset button in battery conpartment There is a lock/light key at bottom ...

...reset button while turning on the scanner which the display stayed blank until I released the reset button, then while the "welcome" message was up I pressed the reset button again, and the display ...

...reset button as above. The display will momentarily blank. - When the display resumes, press TUNE/CLEAR again. Need the manual for your scanner? You can download/print it here: ...

Resetting resetting dosen't work as per the manual Turn the scanner off,remove the batteries,pull the power cord out of the scanner,push and hold the 2, 9 and hold buttons.While holding the buttons in

...reset, and reinitialize. No matter what you do this is all you see. Are you pressing the "SCAN" button? Try pressing the "search" button on the bottom left of the key board. If you want to use the ...

...Reset" button on the side of the case (small hole). If that doesn't work, the next thing to do is to reinitilize the radio. This blows everything away so its the last resort. If you have the cable ...

...the scanner, it should lose all programming and settings. Hold down the Tune/Clear button while pushing the reset button. Do not release the Tune/Clear button until the display clears and

...button, then turn on and hold all three for at least two seconds to reset. With the scanner off, firmly hold down 2+9+State at the same time while turning the scanner on. (You may have do it several ...

how do i factory reset my uniden bc 278clt? MOST, but not all Unidens will reset if you hold down the #2 and #9 button and turn the radio one while holding down those two buttons.