...rotary switch. Do not force anything together. Lightly re-assemble without screws and insert the battery - you cannot make this test without the cover-on as the case supports the switches needed to ...
...battery hatch and remove the screw nearest the outer edge of the camera which is effectively below the memory storage hatch. The back of the camera should now be easy to lift away and reveal the LCD ...
...battery/CF doors. 2. There was a broke (ribbon) connector on the LCD/Electronic viewfinder, still not sure if the very..very small copper traces are mis-aligned possibly causing a short or ...
...replace the viewer screen, and I used the directions to get the back off my camera. The rotary switch and the joystick and their associated circuit board come off with the back. I undid ...
Question about Cameras
...replace battery tray in Tasco 8.trail camera, old on has some rust and no longer makes contact. Any suggestions? A dremel and a few rotary wire brushes, lots of patient scraping with a sharp knife or ...
...rotary switch has gone 10 - 7. This model Kodak suffers from a great deal of switch problems. Cheap China plastic. There are thousands of owners with these cameras having switch problems as the ...
16 questions posted
Usually answered in minutes!
493 Questions
447 Questions
404 Questions
346 Questions
305 Questions