E-Machines W3052 PC Desktop "cable check connection" Questions

...Check your moniter cable, make sure the moniter is plugged in, you may want to unplg it and check the pins for bent pins as well, and make sure you push the on button. No signal means the moniter has ...

how to connect E-Machines W3052 to an HDTV check the video card, there may be ports on it to connect to the tv. it depends on the card and tv adapters.  you need the right cable as well

...Check cables, connections, pins, If you have a Graphics Card, reseat it. Sound like a connection or graphics issue. Do you have a can of Electronic's Contact Spray? I use it for cleaning connector, ...

...check whether the sound card is working by replacing it. If you are playing CD from your CDROM, the cable connection from your CDROM for sound playback to the mother board may not connect properly, ...

...Check it under device manager. If it has a yellow exclamation point, question mark, or is not listed, the driver needs to be installed or reinstalled. If it simply has a red X on it, enable ...

...cable is plugged in. If both of these check out is there a little LED light on your monitor that is on? If not swap it out with another monitor and see if a different one works. If so we have a bad ...

...cable to pc, with battery removed Insert battery, windows will detect "LOCOSTO" device and install drivers Remove and insert battery again, and check in device manager for "Motorola Flash" device. If ...

...Cable and connection appear to be fine."Can it be corrected, or is it time to junk the W4685 and move up? please check the monitor or LCD that you have. because the computer will not flicker if there ...

...cable is not connected to your desktop, or the video-card inside the computer is defective. Check the connections. Temporarily connect the screen to a different laptop/desktop computer, to see if the ...

...cable could be the problem. Next, check the modem. Is it turned on? When you try to dial out, are the lights blinking? If they?re not, the modem might be damaged. If it?s possible, attach another ...