Philips 55PL9773 55" Rear Projection Television "change mode front back" Questions

...but there is a mode that locks the RF input out. You may need a Mits. remote to access it, but I think you can get to it thru the front panel buttons. I'll check on this and get back to you. ...

...change from the 4:3 ratio on the remote or in the menu. Those gray bars are driving me nuts. Any thoughts? press the demo button on the front of the TV, when the screen changes to theater wide mode ...

...mode 2) Set sleep timer to 30 3) Exit menu and change chanel to 124 4) press and hold volume down button ON THE FRONT OF THE TV 5) A red "chk" should appear in the top right coner Once you have the ...

...Mode is used to reset to default settings after 30 mins. and to not retain settings after power off.) Please Let me know if you have any further Questions Thank you for using Fixya and have a Great ...

...mode and adjusted red lines. Picture is great until shutdown and restart then the lines are back to previous setting, high on outside edges. If i perform auto conv. at all the lines come out high ...

...front panel a second time and it goes into 2nd service mode. I have never used that mode, I only use the first sm, but have heard that you can reset your conv points that way. You'll still have a lot ...

...mode and walked away for several minutes. When I came back the picture was gone, but the sound was working. None of the TV functions would work (changing channels, getting a picture) just sound. I ...

...change gun to converge, 5=converge that point. To exit convergence mode you press 7 once and your screen should look like it's imploding then return to normal and then you press 7 to get back into ...

...front. Any suggestions? It is possible that the replacement lamp is bad but more likely the TV has a protection mode that triggers wen the lamp goes out. Check the manual for ways to reset the lamp ...

...mode? I lost my remote. You need the remote because the buttons on the bottom only let you bring up the menu and select the function. it wont let you change them. I have one in for repair and have to ...