Sharp Aquos LC-37GD6U 37 in. LCD HDTV "stop clear button working" Questions

...button on the tv has no effect. The only short-term fix I've found is to unplug the tv and plug it back in. I'm hoping this is an easy fix because it's a particularly frustrating problem with a brand ...

...button none of the panel or remote controls are working on my Toshiba 20wl56b t.v only the on-off botton and the volume control works now on my Toshiba t.v also the remote is not being picked up by ...

clear TV button until all four buttons at the top of the remote are lit press 500 then #. 2.) While at the TV locations (TV1 or TV2 depending on which key is installed), point the remote at the TV. 3.

...clear from any objects. Any other suggestions? I had this problem with my Sharp LCD, stopped working with all remotes .Read on FixYa that all I had to do was UNPLUG the TV, press the power button on ...

...stop it, can't adjust the volume, can't switch over the TV stations...the remote will not do anything either. (Yes, I put in new batteries...still nothing). Hi you will need to reset your Tv & remote ...

...clear things up and make it simple, here is how to program the RCA Systemlink 3 remote: ****WITH DEVICE TURNED ON**** Press and hold the "Code Search" button until the LED lights, then release. LED ...

...clear a fault that is stuck. If it still is not working correct then the tuner is going bad. Check all devices that are plugged in to the set and unplug them from the tv so the tv does not recognize ...

...button on the side of the tv. litigation- O.k if your tv is cycling through the menu ect. it sounds like you have a bad tact switch.Try pressing the contol panel buttons repeatedly,most of the time ...

button to turn it on, it clicks, then short fan noise, then clicks again and shuts down. No sound or picture, no fuzz comes up on screen. I have turned off the power 3 times, waited for the circuts to

...button panel. It may or not be marked reset. Straighten out a paper clip and push it in the hole slowly until you feel it stop. Gently push it to reset the TV. If that doesn't work, then look at the ...