Nu Mark Numark (CD2CD) CD-RW Burner "motor" Questions

error code 505? "505" indicates a motor error, meaning that a motor in the carousel is unable to turn. There are two motors in the carousel: one moves the disk carrier and the other moves the eject ...

...free cloth moistened with denatured alcohol. If the belt is damaged, replace it. Service a DVD tray motor: Unplug the player and test the motor with multimeter Unplug the motor plug and spray it with ...

...its hole every time ,what i have to do to repair it at home actually the problem u got is a faulty motor driving the cd tray...... this happens to every single cd/dvd drive unless it is not properly ...

...etc say the drive is working, but its not. Form the sound of it there is a problem with your motor. Does the unit make any noise after you insert a disc? You should hear a clicking, which is ...

my cd not work motor of cd (arrownd cd) not move , but lens is working Could be a bad laser or spindle motor

external cd drive wont spin  hi check the spindle motor if worn out, you can use an analog tester to check weather the motor is worn out. if no resistance at all or shorted coil then you must ...

...one is stuck and will not go back down - stuck at the top - will not come out or go back down. the motor is damage when you pulled maybe you pulled too hard... change the motor will fix

it, hope this will solve your issue good luck for this you need to open your DVD player 1] there is motor in DVD check if that is working fine. 2] check power cable attached from sensor to logic board

...what problem it have exactly?if it cant bring out correctly,its depend on the lever & inside motor of it.sometimes must change a plastic part that move the lever in & out by motor. no leee ...

...to no avail. Also installed latest firmware, no joy. When you insert the disk, can you hear the motor spinning the disk?  If not- the Nidec drive motor failed.  It may still be under ...