RCA F32650 32" TV "power picture crt" Questions

power but no picture, Is it worth repairing??? by power due you mean sound? remove back ck if any cracks in pc board. or crt broken? discription of prob vague. if board cracked or crt broken not worth

power light blinks and no picture Occasionally when turning on my TV the red power light will blink and there will be sound but no picture. Then it will stop blinking and the picture will be perfect. ...

...power. has sound, no picture on Analog tuner I can hear the channels but no picture also no menus. When shut off the tube powers down and shows a white flash at center of screen maybe the CRT socket ...

...have crt tv when i switched on 10 mins after only the picture came also the picture was small (shrink) delayed start and shrink picture The fault is with its main power supply regulator

...picture & sound ok as sound is there means your power supply &high voltage section is ok problem is in video section 1 crt is glowing or not if not check its supply. 2 check crt base or any connector ...

...picture but with power and sound Check its horizontal output section circuit for any loose solder terminals. Resolder all the suspected solder terminals, by applying a little more solder to each ...

...stereo/stand-by light (red) flashes on/off until just before picture first appears .if your tv is very old than it might be due to crt getting weak crt base loose loose contact in power supply ...

...power on picture is very Blurred as in out of focus the after a while about 5 to 10 mins. picture back to normal.I checked the circuit board for a dried capacitor in the power supply circuit but all ...

...picture is out sound is ok means power supply is ok. as there is no picture there is a problem in video or luminance section. 1 check chroma ic supply 2 check signal line to video section 3 loose ...

...power voltage to the TV but it's a stretch. Now how the picture looked so good when first fired up is interesting. Did you move the TV to a different AC outlet? Just wondering if the AC power source ...