Samsung LN-R328W 32 in. HD-Ready LCD Television "turn internal speakers lcd" Questions

no sound changhong tv/dvd combo no sound from speakers or headphone Be sure internal speakers are turned on, then most likely MAIN PCB you will need your complete Model/Serial #s to get the correct pt

...turn switch off the internal speaker, and bypass the signal to the external speaker. But; the you can't bypass the audio output, but the audio signal output from the back of the TV to any external ...

...reciever to the audio output jacks of the TV and see if you get any audio from there. If you do at least you can still get sound from your tv...even though it is not from the internal

internal "switch-mode-power-supply / ccfl inverter supply" would be first place I would investigate for a "thermally intermittant" (cold, frosty looking) solder joint on a active or passive electronic

sure you have the audio enabled. Some TV sets have a option to turn off the internal speakers. Also make sure mute isn't turned on. If you are using external audio setup, double check your connections

...turn internal speakers back on for this model? This might help you. Proscan 19LA25Q 19" LCD HDTV at Crutchfield.com Proscan 19LA25Q 19' LCD HDTV: Detailed Info, Features and Specs, and Photos. ... ...

internal speakers, then you're probably 'over-driving' the speakers! look into adding higher capacity external speakers, perhaps 'surround sound', or a less expensive 'multi-speaker' system. good luck

...turn the internal speakers off through the tv's menu...either in the Audio section or in Settings 32 inch flat screen works great when cold 5minutes screen goes all wavey and sound just screams very ...

turn off internal speakers This is usually a menu option that you can reach with your remote. I don't have this particular TV, but if you can turn them off, it is usually a menu configuration ...

...turn it off cos i installed a philips home theater system. my name is pat bruton and my tv is a samsung 40 inch lcd model la4oa550p1rxxa version ss03 Return to the initial set up procedure and enable ...